Effet guitare divers

Death By Audio Total Sonic Annihilation 2

Ajouter ce produit à

Mon ancien matos
Mon matos actuel
Mon futur matos

Effet guitare divers de la marque Death By Audio

Déposer un avis

Meilleurs prix

Forums

Où acheter Total Sonic Annihilation 2 ?

Moins

Neuf (3 offres)
Occasion

Meilleur prix neuf

Voir plus d’offres

Fiche technique

Créée le 08/01/2019

Fabricant : Death By Audio
Modèle : Total Sonic Annihilation 2
Catégorie : Effets guitare divers
Poids du colis : 393 g
Autres dénominations : totalsonicannihilation 2, totalsonicannihilation2, total sonic annihilation2, tsa 2

Pédale de boucle de feedback pour guitare

CONTROLS

FEEDBACK: The big knob. This controls the amount the SEND (external effect input) is forced back into the RECEIVE (external effect output). This creates feedback within the circuit to create new unbridled and experimental effects and results. The more this knob is turned up the more intense and explosive the effects are. The ACTIVE BOOST is also in this loop and (if engaged) will be forced back into itself to create its own wild and interesting sounds if nothing is plugged into the loop.

ON: This toggle switch when in the ON position turns on the ACTIVE BOOST circuit.

PHASE: Flips the phase of the effects loop, only when the ACTIVE BOOST is on.

GAIN: Controls the amount of gain of the ACTIVE BOOST circuit.

LIMIT: Limits the output volume of the entire pedal only when the ACTIVE BOOST is engaged.

STOMP SWITCH: Bypasses the effect.

NOTE: When the TSA2 is turned off the TSA2 is bypassed but every pedal in the loop is still part of your signal chain. Any effect(s) in the loop works as usual.

CONNECTIONS

INPUT: Plug an instrument into this jack.

OUTPUT: The output of the Total Sonic Annihilation 2 is here. It connects to your amplifier.

SEND: Connect this to the input of the effect (or chain of effects) you would like to control and warp. If left unconnected it is connected internally to the receive jack.

RECEIVE: This is connected to the output of the effects in the feedback loop.

9V: Plug a 9V Negative Tip Positive Ring DC adaptor in here. When plugged in it will bypass the internal battery. NOTE: When the ACTIVE BOOST is not engaged, the pedal is completely passive and can work without power.