PyraOs V0.83
- 1 réponse
- 2 participants
- 527 vues
- 2 followers
audiocuisine
16
Nouvel·le AFfilié·e
Membre depuis 14 ans
Sujet de la discussion Posté le 13/11/2015 à 10:23:21PyraOs V0.83
13 november 2015
Bug fixes
Pyramid now stops all notes before loading and saving.
Problem when using an arpeggiator with a swing.
Freeze when loading a project.
Display problem when dezooming a track with multiple pages.
Display problem when scrolling fast the stepmode EFFECTS list (ERR 9335).
Master sync improved at start/stop/pause actions.
Graphic improvements
New project header
On all 4 modes, Pyramid now displays the current sequence and the next sequence to be played if there is one.
COPY pad, PASTE pad, DELETE pad and UNDO pad now blink to indicate the action is done.
New popups for assigned encoders (when clicking an assigned encoder).
Disabled effects in FX manager are now grey tinted.
Chord DISP: displays the piano roll on stepmode CHORD. Rotating the menu encoder allows you to move to the chord root note.
In CC MESSAGES stepmode and EFFECTS stepmode, a grid is displayed to help you to edit automations.
Notes exceeding the current page on the piano roll view are now displayed on the next page too. (stepmode NOTE and CHORD)
TRACK mode now displays the content of a track, either it is NOTES, EFFECTS, CC automations or FX automations.
New features STEP mode
Stepmode selection list is not circular anymore.
When changing the stepmode, passing over “EUCLID” no longer mutes the track.
Hold 2ND and press ASSIGN to enter the “5 encoders shortcuts” mode: in step mode, encoder 1 will control EUCLID STEPS, encoder 2 will control EUCLID FILLS, encoder 3 will control VELOCITY, encoder 4 will control LENGTH, encoder 5 will control OFFSET. When filter mode is activated, you can't use the 5 encoders to control CC messages and effect parameters. Exit this mode by pressing ASSIGN.
Filter mode: in stepmode NOTE and stepmode CC MESSAGES, double tap STEP to activate the filter, in order to scroll only through programmed notes or CC messages. double tap STEP to exit the filter mode.
Program Change midi messages are sent only if they was not sent before, to avoid sending them at each beginning of the loop. If you press 3 times STOP, Pyramid will resend all Program Changes of tracks, useful to be sure that all your PC are sent before playing a project.
In CC message stepmode, the default current CC value is now the first value set, instead of “0” (if an automation exist).
In stepmode CHORD, hold 2ND and rotate the menu encoder to select the tonality.
New features TRACK mode
BPM is displayed only if you press the BPM pad.
Configure tracks run modes: While in track mode, hold TRACK and rotate encoder menu to select the running mode (FREE, RELATCH, TRIG):
FREE (no icon displayed under TR, default mode): when a new sequence starts, if the track was active in the last sequence, this track continues to play without restarting at its beginning. In other words, track keeps playing from its last position, useful for get the best out of polymetrics: tracks shift against each other.
RELATCH ( icon displayed under TR): when a new sequence starts, the track always restarts at its beginning. It's an easy way to sync your tracks.
TRIG ( icon displayed under TR): track is playing once at the beginning of the sequence, and does not loop. The track is simply triggered.
New features SEQ mode
SEQ mode: choose to PERFORM sequences (launch sequences after the selected number of bars or instantly), PLAY sequences (sequences arrangement will stop at the end of the chain) or LOOP sequences (sequences arrangement will loop at the end of the chain)
Now you can copy, paste & delete sequences.
When you add a sequence in the chain, Pyramid now displays the full length of the sequence. It's the number of bars after which all tracks are sync again, if using different track length. For example a sequence with a 3 bars length and a 4 length had a full length of 12 bars.
New features Save/load mode
Saving an existing project creates a backup file in the SD card, for example “BACKUP_PROJECT1”, to always keep an old version of your project.
New settings
Settings > Midi Out > Midi A Mode (midi out, midi thru, midi out + thru): select the behavior of midi A output port
Settings > Midi Out > Midi A Mode (midi out, midi thru, midi out + thru): select the behavior of midi B output port
Settings > Misc > Double Tap Mode (velocity, glide): in NOTE and CHORD stepmodes, double tap a pad to enter velocity accents or gliding notes. Glides only works with compatible synths, if two notes follow, the first one need to be double tapped to create a glide between these two notes).
Settings > Misc > Rec Countdown (off, current track, midi channel xx): activate a countdown before a recording in live mode, and choose on which midi channel the countdown (made with midi notes) is generated.
Settings > Misc > CC Assign (autorec off, autorec on): with autorec on, as soon as you assign a CC control and move it to set the value, an automation message is created to store this value (you can display it or remove it in stepmode CC MESSAGES). This message will be sent at the start of the track, so your synthesizer will always have the right set value.
Settings > Misc > Play pad (pause/continue, restart): If play/pause selected, a press on the PLAY pad will alternately play and pause the playback. If restart selected, a press on the PLAY pad will always restart the playback from the beginning.
Settings > Misc > Default track (mode free, mode relatch, mode trig): set the default run mode of new tracks.
Settings > Misc > Popup Assign (on click, on rotate): to display the assigned encoder popup when you click one of the 5 encoders, or when you rotate it.
Settings > Misc > Touchpad Relatch (no relatch, relatch value): if no relatch selected, the touchpad (assigned X or Y position) will keep it's last set value. If a value is selected (for example 0), the touchpad will send back this value when the touchpad is released.
http://www.squarp.net/pyraos.html
Bug fixes
Pyramid now stops all notes before loading and saving.
Problem when using an arpeggiator with a swing.
Freeze when loading a project.
Display problem when dezooming a track with multiple pages.
Display problem when scrolling fast the stepmode EFFECTS list (ERR 9335).
Master sync improved at start/stop/pause actions.
Graphic improvements
New project header
On all 4 modes, Pyramid now displays the current sequence and the next sequence to be played if there is one.
COPY pad, PASTE pad, DELETE pad and UNDO pad now blink to indicate the action is done.
New popups for assigned encoders (when clicking an assigned encoder).
Disabled effects in FX manager are now grey tinted.
Chord DISP: displays the piano roll on stepmode CHORD. Rotating the menu encoder allows you to move to the chord root note.
In CC MESSAGES stepmode and EFFECTS stepmode, a grid is displayed to help you to edit automations.
Notes exceeding the current page on the piano roll view are now displayed on the next page too. (stepmode NOTE and CHORD)
TRACK mode now displays the content of a track, either it is NOTES, EFFECTS, CC automations or FX automations.
New features STEP mode
Stepmode selection list is not circular anymore.
When changing the stepmode, passing over “EUCLID” no longer mutes the track.
Hold 2ND and press ASSIGN to enter the “5 encoders shortcuts” mode: in step mode, encoder 1 will control EUCLID STEPS, encoder 2 will control EUCLID FILLS, encoder 3 will control VELOCITY, encoder 4 will control LENGTH, encoder 5 will control OFFSET. When filter mode is activated, you can't use the 5 encoders to control CC messages and effect parameters. Exit this mode by pressing ASSIGN.
Filter mode: in stepmode NOTE and stepmode CC MESSAGES, double tap STEP to activate the filter, in order to scroll only through programmed notes or CC messages. double tap STEP to exit the filter mode.
Program Change midi messages are sent only if they was not sent before, to avoid sending them at each beginning of the loop. If you press 3 times STOP, Pyramid will resend all Program Changes of tracks, useful to be sure that all your PC are sent before playing a project.
In CC message stepmode, the default current CC value is now the first value set, instead of “0” (if an automation exist).
In stepmode CHORD, hold 2ND and rotate the menu encoder to select the tonality.
New features TRACK mode
BPM is displayed only if you press the BPM pad.
Configure tracks run modes: While in track mode, hold TRACK and rotate encoder menu to select the running mode (FREE, RELATCH, TRIG):
FREE (no icon displayed under TR, default mode): when a new sequence starts, if the track was active in the last sequence, this track continues to play without restarting at its beginning. In other words, track keeps playing from its last position, useful for get the best out of polymetrics: tracks shift against each other.
RELATCH ( icon displayed under TR): when a new sequence starts, the track always restarts at its beginning. It's an easy way to sync your tracks.
TRIG ( icon displayed under TR): track is playing once at the beginning of the sequence, and does not loop. The track is simply triggered.
New features SEQ mode
SEQ mode: choose to PERFORM sequences (launch sequences after the selected number of bars or instantly), PLAY sequences (sequences arrangement will stop at the end of the chain) or LOOP sequences (sequences arrangement will loop at the end of the chain)
Now you can copy, paste & delete sequences.
When you add a sequence in the chain, Pyramid now displays the full length of the sequence. It's the number of bars after which all tracks are sync again, if using different track length. For example a sequence with a 3 bars length and a 4 length had a full length of 12 bars.
New features Save/load mode
Saving an existing project creates a backup file in the SD card, for example “BACKUP_PROJECT1”, to always keep an old version of your project.
New settings
Settings > Midi Out > Midi A Mode (midi out, midi thru, midi out + thru): select the behavior of midi A output port
Settings > Midi Out > Midi A Mode (midi out, midi thru, midi out + thru): select the behavior of midi B output port
Settings > Misc > Double Tap Mode (velocity, glide): in NOTE and CHORD stepmodes, double tap a pad to enter velocity accents or gliding notes. Glides only works with compatible synths, if two notes follow, the first one need to be double tapped to create a glide between these two notes).
Settings > Misc > Rec Countdown (off, current track, midi channel xx): activate a countdown before a recording in live mode, and choose on which midi channel the countdown (made with midi notes) is generated.
Settings > Misc > CC Assign (autorec off, autorec on): with autorec on, as soon as you assign a CC control and move it to set the value, an automation message is created to store this value (you can display it or remove it in stepmode CC MESSAGES). This message will be sent at the start of the track, so your synthesizer will always have the right set value.
Settings > Misc > Play pad (pause/continue, restart): If play/pause selected, a press on the PLAY pad will alternately play and pause the playback. If restart selected, a press on the PLAY pad will always restart the playback from the beginning.
Settings > Misc > Default track (mode free, mode relatch, mode trig): set the default run mode of new tracks.
Settings > Misc > Popup Assign (on click, on rotate): to display the assigned encoder popup when you click one of the 5 encoders, or when you rotate it.
Settings > Misc > Touchpad Relatch (no relatch, relatch value): if no relatch selected, the touchpad (assigned X or Y position) will keep it's last set value. If a value is selected (for example 0), the touchpad will send back this value when the touchpad is released.
http://www.squarp.net/pyraos.html
jouks
335
Posteur·euse AFfamé·e
Membre depuis 17 ans
2 Posté le 13/11/2015 à 17:45:51
On va découvrir tout ça.
Si c'est pas du major upgrade jm'y connais pas.
Merci Squarp
Si c'est pas du major upgrade jm'y connais pas.
Merci Squarp
- < Liste des sujets
- Charte