réactions à la news Commentaires sur la news : Le 2-XM est sorti chez Behringer

Exactement, il se trouve que dans le sketch il n'y a pas de différence.

POLYCHAINING
If you have multiple 2-XMs, you can
connect them in a ‘Poly Chain’ to produce
polyphonic sounds. The 2-XM works by
sending unhandled notes to the next
in the chain. When the chain runs out,
subsequent notes are not played. The
first 2-XM plays the first played note,
the second plays the second, the third
plays the third etc. Note that a 2-XM in
Paraphonic mode will handle 2 notes. Each
2-XM must have the same MIDI channel
number set using the rear panel switches
or SynthTribe app. Set the Poly Chain ON
for all 2-XMs using the SynthTribe app. The
last 2-XM in the chain can either be set
to Poly Chain on or off depending on how
you would like the MIDI information to be
handled. If Poly Chain is on, the last 2-XM
will act as if it is sending the next played
note over the maximum number of notes
played to the next device in the chain, and
the note will not be heard or dropped. If
Poly chain is off for the last 2-XM, the next
played note over the maximum number of
notes will steal the last played note from
the last 2-XM. If you are only using one
2-XM, make sure the Poly Chain is OFF.
Note that the Power LED changes color to
red when polychaining is enabled.

Si, depuis des lustres

Je pense que c'était du second degré