réactions à la news [NAMM] Elektron Digitakt, BAR et sampleur

Même si le volca sample reçoit les notes sur un même canal midi, rien ne t'empèche de le piloter via le digitakt... tu mets les 8 pistes midi du digitakt sur le même canal (celui de ton volca sample) et tu assignes chaque piste à une note différente (chaque note pilotant un sample de ton volca sample). Tu peux biensur piloter plusieurs samples de ton volca sample avec une seule piste en changeant de note d'un pas à l'autre...

Par contre, dans ton message tu parles d'envoyer un sample sur les midis track du digitakt, c'est une erreur... c'est le digitakt qui séquencera ton volca sample!

Très bon ! La liste des bugfix est pas mal non plus :

Citation de Bugfix 1.05

 Allowed more headroom in the bit-crusher to improve audio quality.
Main output had inverted polarity. The main output polarity has been reversed.
The Sound browser would change the preview sound immediately when highlighting it in the list. The Sound browser now changes the preview sound only when you press [FUNC]+[YES].
LFO Depth parameter locks were sometimes lost when saving.
Outgoing MIDI CC data from the FX parameter pages were under some circumstances sent to the wrong MIDI channel.
BPM fraction would sometimes be incorrectly displayed.
The filter trig parameter had no effect. The filter envelope was always triggered by a note trig but never triggered by a lock trig. All patterns will be automatically upgraded to compensate for the changes introduced by this fix.
Lock trigs affected the release timing of the amplitude envelope.
Page LEDs would not be fully lit when expanding pattern length in the SCALE menu.
MIDI sequencer would crash under certain circumstances.
Selecting OS Upgrade while unit was playing audio would output a static high pitched tone.
After nudging the tempo, the tempo would change to the value set in Global tempo mode, even if Pattern tempo was enabled.
Consecutive clear/paste of parameter pages would not work as intended.
Sample selector and modulation destination selector would flicker if they were changed at the same time as another parameter.
Unit would sometimes freeze during the startup sequence.
MIDI CC was not transmitted from the Master page.
Tune and Note params would skip two octaves instead of one, when dialed with [FUNC] pressed.
In some cases MIDI tracks would stop sending CC values.
Holding down [FUNC]+[CLEAR] while in grid recording mode would rapidly toggle between undo and redo.
NRPN was not received.
When pressing [FUNC]+[TEMPO] Mute mode would get activated until [FUNC] was pressed again.
Track sound name would not be updated after sound export. Sound list would not be closed after saving a sound.
Note length when recording multiple Audio tracks (i.e when not in chromatic mode) would not work properly.
The unit would freeze when having external clock and selecting OS Upgrade. Lock trigs would always affect the note value.

 L'overdrive a été amélioré et me semble plus efficace. Par contre j'ai pu remarquer un clic plutôt gênant entre les valeurs 0.00 et 0.01, vous aussi ?