Commentaires sur le test : L'as de cœur…

CV Mode V/OCT / V/Hz
Selects the desired CV mode:
• V/OCT selects 1 Volt per Octave (exponential
scale).
• V/Hz selects Volt per Hertz (linear scale).
w Hint: CV ranges from 0 to 5 Volt.
CV Amp PITCH / UNIPOL / BIPOL
Determines the CV output:
• If PITCH is selected, pitch will be send via CV
when a note is played or the arpeggiator generates
notes.
• UNIPOL sets the basic value for sending unipolar
modulation sources as envelopes or velocity.
The default value is 0 V and can be modified
in the Modulation matrix.
• BIPOL sets the basic value for sending bipolar
modulation sources as LFOs. The default value
is middle voltage and can be modified in the
Modulation matrix.
CV Tune -64...+63
Scale/slope adjusting parameter for the CV output. A
spread from 1.5 to 2.5 is possible.
CV Adjust -64...+63
Determines a fixed value which will be added to the
control voltage.
Gate Mode HIGH / LOW
Setting of the polarity of Gate Out.

Sorry! We can't find that track.

Did you try to access a private track, but were not logged in?
Maybe the track has been removed